High-Purity Anatase Titanium Dioxide A-F260
A-F260 is a sulfate-process, high-purity anatase titanium dioxide grade with a TiO₂ content of at least 99%. It is designed for specialty applications requiring high whiteness, opacity, controlled sieve residue and low acid-soluble impurities.
End-use suitability depends on the intended application, target market and current regulatory requirements. Customers should review the latest TDS, SDS and applicable compliance documentation before commercial use in any regulated application.
- Technical specification
- TDS
| Item | Property | |
| TiO₂ content, % | Min | ≥99 |
| Sieve residue (45 μm), % | Max | 0.05 |
| Oil absorption, g/100 g | Max | 23 |
| Moisture at 105 °C, % | Max | 0.5 |
| Acid-soluble substances (0.5 N HCl), % | Max | 0.5 |
| Antimony soluble in 0.5 N HCl, ppm | Max | 1 |
| pH | 6.0-8.5 | |
| Color index | Pigment white 6 | |
| Packing | 25kg/bag, 500kg/bag, 1000kg/bag | |
| Application | Specialty applications requiring high-purity anatase titanium dioxide. End-use suitability is subject to current product documentation, applicable regulations and customer qualification. | |
| Storage
|
Store in a cool, dry and well-ventilated area. Keep the packaging tightly closed and protect the product from moisture and excessive heat. | |
| Handling
|
Avoid dust formation and inhalation during transfer, weighing and dispersion. Use appropriate local exhaust ventilation and personal protective equipment where dust may be generated. Refer to the current SDS before handling. | |
A-F260 Product Qualification Guidance
A-F260 is a high-purity anatase titanium dioxide grade intended for specialty formulations where TiO₂ content, acid-soluble impurities, sieve residue and batch consistency are important qualification parameters.
High TiO₂ Content
A minimum TiO₂ content of 99% supports applications requiring a high-purity anatase pigment.
Controlled Impurities
Acid-soluble substances, antimony, moisture and sieve residue should be reviewed against the customer’s formulation and process requirements.
Application Qualification
Dispersion, opacity, color, filtration behavior and process compatibility should be confirmed in the customer’s actual formulation.
Qualification Before Commercial Use
- Confirm the current product specification, test methods and batch documentation.
- Evaluate dispersion, color, opacity and filtration behavior in the intended formulation.
- Check moisture, pH and processing compatibility under actual production conditions.
- Verify all market-specific regulatory and end-use requirements before commercial use.
Approval requirements vary by country, market and end use. A-F260 should not be considered universally approved for food, pharmaceutical, cosmetic, oral-care or food-contact applications. Request current compliance documentation before qualification.