Chloride Titanium Dioxide for Plastics: Whiteness, Lightness and Opacity

White plastic test plaques, polyethylene film and masterbatch pellets beside an optical testing instrument
AI-generated application illustration; not a photograph of the reported test.
Quick answer: Select chloride titanium dioxide for plastics by testing white appearance and opacity in the intended resin and product thickness. ICC CR-83 is a chloride-process rutile candidate for this optical evaluation. Record L*, the chosen whiteness index, shade and hiding separately; chloride processing alone does not establish the whitest result in every formulation.

A photograph of white plastic cannot establish which titanium dioxide grade is whiter. Lighting, exposure, backing and the specimen itself affect what the viewer sees. A purchasing decision needs a controlled optical comparison and a clear description of the white product the customer wants.

For CR-83 chloride titanium dioxide, the useful questions are concrete: how light is the specimen, does its shade meet the target, and how well does it hide what is behind it? This guide explains how to keep those questions separate while reaching one practical grade-selection decision.

Whiteness, lightness and opacity are not interchangeable

Do not relabel an L* value as a whiteness percentage. Likewise, a CIE whiteness index is not a direct measurement of hiding. Preserve the original property names and units when discussing supplier results.

A relatively blue shade may suit one product, while another customer needs a warmer white. The highest whiteness index is therefore not automatically the best colour match. Compare the measured coordinates and the approved reference under the agreed viewing conditions.

Surface finish also belongs in the trial. A smooth plaque and a textured moulding can give different optical appearances even if their pigment recipe is the same. Use specimens that meaningfully represent the final product.

Term Meaning in the comparison What to record
Lightness, L* The lightness coordinate of the measured specimen Instrument setup, specimen surface and backing.
Whiteness index A defined numerical assessment of a near-white specimen The named index, illuminant, observer and applicable method.
Shade, a* and b* Red–green and yellow–blue coordinates The approved target and allowed colour difference.
Opacity or hiding How effectively the specimen obscures a contrasting background Thickness, loading, backing and measurement procedure.
Gloss The surface’s directional reflection Measurement angle and the required surface finish.

What the chloride route does—and does not—specify

The chloride route identifies a pigment manufacturing process. The phrase “chloride titanium dioxide for plastics” narrows the supplier brief, but it does not define a finished-plastic result. The individual grade, resin, concentration, processing and specimen preparation still matter.

CR-83 is the chloride-process candidate in ICC’s plastics selection discussion. If the purchasing requirement explicitly calls for chloride TiO₂, state that requirement alongside the optical and processing acceptance criteria.

Do not treat a coating grade and a plastics grade as interchangeable because both use chloride processing. Ask for the intended application and supporting technical documentation for the specific grade being offered.

CR-83 evidence: useful data without an artificial ranking

The ICC Plastics Grade Selection Guide reports a separate CR-83 white-PVC evaluation at 4.0 PHR, with L* 97.95 and CIE whiteness 88.58.

These figures describe the stated specimen. They are not a matched three-way comparison with DR-2588 and R-F9156, whose cited historical results come from another campaign. They should not be plotted together as proof that one route or grade always delivers the highest whiteness.

PHR is a parts-per-hundred-resin formulation basis. It should not be read as the same number in final-blend weight percent. Reproduce the original recipe basis when using the result as a reference, and request the current TDS for supply specifications.

Prepare a matched optical comparison

For a film project, a plaque comparison can help with preliminary screening but should not be the final acceptance test. Make the intended film at controlled thickness and the intended addition level. For a moulded part, consider the actual surface and wall geometry rather than relying only on a flat laboratory plaque.

If the product is produced through a masterbatch, distinguish pigment concentration in the concentrate from the final TiO₂ concentration after let-down. Record both so that the trial can be reproduced by the customer.

  1. Define the final product. State whether the application is film, sheet, a moulded part or a PVC compound. Specify the polymer, geometry and required finish.
  2. Use the same formulation basis. Record TiO₂ concentration and the complete carrier or additive package. Keep the initial incumbent and CR-83 comparison otherwise consistent.
  3. Control processing history. Prepare samples with the same agreed temperature profile, residence conditions and procedure. Retain process records with the specimens.
  4. Make comparable specimens. Use the same thickness, surface texture and conditioning. Measure thickness where it is important to the optical result.
  5. Measure white appearance. Record L*, a*, b* and the required whiteness index using the same instrument settings and backing. Include the approved reference.
  6. Measure hiding separately. Use the agreed opacity or transmission procedure for the product. Do not infer this result from L* or a whiteness index.
  7. Inspect and repeat. Check specks, streaks and surface defects, then repeat the promising condition before a production decision.

How to interpret common result combinations

Avoid judging a close result from one reading. Rotate or sample the specimen as required by the laboratory method, retain individual observations and repeat the preparation where practical. A consistent advantage against the product limits is more useful than a small unexplained difference.

If a colour correction is made, document it as a separate formula. Adding a tinting component can bring the shade closer to target, but the resulting specimen still needs its own opacity, processing and quality checks.

Result pattern What it means for the next decision
Higher L* but an unacceptable b* shift The specimen is lighter under the method, but the shade still needs evaluation against the target.
Higher whiteness index but similar opacity The white appearance changed; hiding has not necessarily improved.
Good plaque optics but poor thin-film hiding Check thickness, final loading and dispersion in the actual film process.
Acceptable optics but visible specks Continue dispersion and process investigation before qualifying the grade.
Good fresh colour but change after processing stress Evaluate the actual temperature and residence-time window with the complete formulation.

Choose the shortlist according to the application

CR-83 is the candidate to discuss when chloride processing and white-plastic optical performance are central to the brief. Compare DR-2588 where blue undertone and dispersion or filtration requirements are especially important.

For value-focused masterbatch, include R-F9156 and calculate cost at the accepted use level. For outdoor PVC or another exposure-sensitive plastic, include weatherability requirements and review DR-2589.

These application positions organise the screening programme. They do not remove the need to measure shortlisted grades in the same customer system. A successful optical result must also fit the process and the final product specification.

Frequently asked questions

Does chloride TiO₂ always give the highest whiteness in PVC?

No universal conclusion follows from the production route. Compare the specific grade in the same PVC recipe, with the same processing and measurement conditions.

Can I compare a supplier’s L* directly with another supplier’s CIE whiteness?

No. They are different properties. Ask for matching metrics and test details, and preserve the named whiteness calculation.

Does a brighter plastic automatically hide better?

No. Measure opacity or transmission separately at the final product thickness and pigment concentration.

Is a masterbatch pellet photograph enough to evaluate colour?

No. Use controlled specimens and measurements, then inspect the actual finished plastic under the agreed conditions.

What should a CR-83 acceptance specification contain?

Identify the grade and current supply specification, then define the application tests and limits relevant to your product. Keep lot acceptance documents separate from historical application examples.

Request a CR-83 optical-performance trial

Provide the polymer, carrier if used, pigment concentration, processing temperature, final thickness and approved colour target. Tell ICC whether the priority is white appearance, hiding, a particular undertone or a chloride-process specification. Request the current CR-83 TDS and a sample against those conditions.

See CR-83 in the ICC plastics selection guide · Request samples and a quotation

Titanium Materials Solutions for Industrial Applications

Explore ICC titanium dioxide, infrared-reflective TiO₂, high-purity titanium materials and titanium-based lithium adsorbents, supported by application testing and technical service.
Scroll to Top